I know this is old, but this thread helped me solve my problem. ![]() Doing it through the UI, I upload it, it says flash successful, or something like that, reboots and is still the custom firmware. I eventually tried to reflash the dd wrt firmware I had and it worked!! I can no access the router through the typical 192.168.1.1 address.īUT, I cannot get the OEM firmware to flash still. I tried everything I could find online, erasing the nvram, using flash -noheader : x and flash -noheader : x with sending the firmware file to it and then sending it go. It did nothing, expect spit out Board and Image ID's. I rebooted it, ctrl+c and manually entered tftpd, and sent the file. Letting it boot, I saw that it eventually made it's way to tftp. ![]() I eventually found out that there was serial header on the board so I hooked up to that and got Putty up and could see that it was at least alive. A 30/30/30 reset did nothing, Netgears tftp app did nothing, not even sending the oem firmware over tftp on the command line did anything. When I tired to go back the router was bricked, soft bricked since I could ping it but nothing but an orange flashing power light. Oringally, when I installed a custom firmware it worked but I had to go back since I th 5Ghz band kept dropping out. ![]() Hey everyone, I'm having a massive amount of trouble reverting back to the OEM firmware.
0 Comments
Leave a Reply. |